HaTmed 23L B and S Class Water Cooling Autoclave

$8,499.00 Excl. GST

The Water Cooling Autoclaves is the ideal solution to meet the increasing sterilisation needs of an active practice. This fully automatic, B Class Steriliser with S Class Cycles features a superior German Speck O-Ring liquid vacuum pump coupled with a 100% Stainless Steel Steam Generator and provides the heavy-duty internal components necessary to meet the latest EU & Australian Standards.


Share This Product
Share on facebook
Share on twitter
Share on linkedin
Share on email
Share on whatsapp

HaTmed 23L Water Cooling Autoclave
Continuous High Quality and High Efficiency Sterilisation

Equipped with superior German Speck O-Ring Liquid Vacuum Pump, HaTmed Water Cooling Autoclaves can achieve a Vacuum Level as low as -0.96 Bar. The Water Cooling Series is the best 24/7 Heavy Duty Sterilizer, as they have fast heat dissipation. It features thorough sterilization and outperforms most standard water cooling autoclaves in the market, with its fastest full B Class cycle time in 27 Minutes, and is the best performing choice for Dental and Specialist Clinics.


  • Optimal Drying Results
    The Water Cooling Autoclaves generate saturated steam quickly, ensuring maximum steam penetration and high-quality sterilisation on your instruments, and achieve optimal drying results, even for textiles.

  • Patented Steam Generator
    Our patented steam generator can produce saturated steam in a short time. 100% Stainless Steel guarantees reliability by avoiding rust and corrosion that causes clogs and malfunction.

  • High Sterility Assurance Level
    Powered by a German Speck O-Ring Liquid Vacuum Pump capable of achieving a Vacuum Level of -0.96 Bar, our Water Cooling Autoclaves extract air from hollow or porous loads and fill them with saturated steam, ensuring effective sterilisation while lowering the risk of infection.

  • Imported Parts & Powerful Performance
    Our Water Cooling Autoclaves are equipped with parts from all over the world. The Liquid Vacuum Pump and Temperature Sensors are sourced from Germany, the Pressure Sensor from America, and the Solenoid Valve is from Italy. These parts ensure the best performance and fast turnover of instruments, meeting the needs of busy clinics.
Hatmed Hatq72B Water Cooling Autoclave Interior

HaTmed 23L Water Cooling Autoclave (Features)

Hatmed Hatq72B Water Cooling Autoclave Tray Removal
  • Safety Lock
  • 11 Programs – Cycle Parameters can be customised to meet various specific needs.
  • Emergency Stop
  • Additional Drying – Depending on various conditions, additional drying time can be set to achieve different drying needs if your instruments are not coming out as dry as they should.
  • Embedded System
  • 3-Times Pre-Vacuum
  • Power Outage Protection If the autoclave is powered off for any reason or due to power failure, the inner chamber depressurises back to normal, allowing the load recovery via the emergency release socket. Alternatively, the cycle will resume once power has been restored.
  • Intelligent Error Detection
  • Smart Load Monitor System
  • 5.6 Inch Touch Screen Display
  • Automatic Update with USB Drive
  • Patented Stainless Steel Steam Generator – Can produce Saturated Steam in a short time, while 100% Stainless Steel helps avoid rust and corrosion that causes clogs and malfunction.

Imported Parts

  • ODE Italian Solenoid Valves – More reliable and durable compared to regular consumer level products.
  • German Speck O-Ring Liquid Vacuum Pump – Provides superior performance, Vacuum Level as low as -0.96 Bar, and ensures fast speed, sufficient drying and sterilisation quality.
  • German Temperature and Liquid Level Sensor
  • Swiss Flowmeter
  • American Pressure Sensor
  • Independent Steam Generator – Stainless Steel, and highly resistant to corrosion, it is designed for generating pure steam and protects the instruments. Novel structure ensures both efficiency and steam quality.
HäTMED 23L Q72B B and S Class Autoclave
23 Litres
Fastest B Cycle Time (Includes Drying)
27 Minutes
Door Lock
Chamber Material
304 Stainless Steel
5.6 Inch Touch Screen Display
Chamber Dimensions
253mm x 475mm
Device Dimensions
452.4mm (W) x 436mm (H) x 687mm (D)
7KG Metal Instruments or 2.5KG Textile
Trays Included
5 Trays
Tray Dimensions
395mm * 165mm * 23mm
10A Outlet 240V 50Hz 2400W
Optional Printer
External Printer (HATEXPRI2)
Cycle Recording to USB
Water Requirements
External Cold Water Mains Supply and Drain
Residual Humidity
< 0.1%
Vacuum Level
-0.96 Bar
Liquid Laboratory Cycle
Available By Special Order
Cycle Types
GEN121, GEN134, Quick B, Quick S,
GEN134+, Optional Liquid, User 1, User 2
Standard Components
ODE Italian Solenoid Valves
Independent Steam Generator
German Thomas Vacuum Pump (170L/Min)
External Case Material
304 Stainless Steel Cover

Note: All technical data, programs, and configurations may vary with models. HäTmed reserves the right to modify technical parameters without prior notice.
Kit Contents - HaTmed Q72B 23L B & S Class Water Cooling Autoclave

User Manual
HATQ72B Water Cooling Autoclave (User Manual)

Cycle Recording Sample Output
HäTmed Cycle Recording Sample Output
HATQ72B Water Cooling Autoclave (FAQs)

Zone Medical